What’s the Right Way to Hang Roller Shades?
http://www.decor-ideas.org 10/29/2014 21:13 Decor Ideas
While hanging toilet paper over or under will always be a matter of personal preference, plenty of practical reasons contribute to the ways to hang roller shades. Is blocking light more important? Appearance? Here’s what to know to help you decide.
Standard Roll
The most common option is the standard roll, shown here, in which the fabric rolls back, close to the window glass. “Having it as close to the glass as possible blocks the most amount of light and affords the most privacy,” says Josh Gaudet, a design consultant with Blinds.com.
A standard roll is recommended for small reveals, meaning the window depth is shallow, because it gets the fabric farther inside the opening than if the roll were reversed. “Otherwise the shade will feel like it’s floating in the room,” says Gaudet.
The downside for a standard roll, says Gaudet, is that the roll and hardware show — a look some people don’t like.
If that’s the case, valances, as shown here, can hide the roll. This offers the most finished look but definitely increases the cost. In some cases adding a valance can double the cost of the shade, says Gaudet. Also, valances cover up decorative molding, which may not appeal to some homeowners.
Reverse Roll
A reverse roll means the fabric comes over the front of the roller, as shown here. You don’t see the fabric on the tube, so this creates a more finished look without the need for a valance.
Reverse rolls are also used for shades that have two different colors on each side of the fabric, says Kimi Brown of Manhattan Shade & Glass. This is the case, for example, with blackout shades that have white on one side and color on the other. For one of these blackout shades, hanging the roller standard would mean that the roller would show all white while the part of the shade that hangs down would be black.
A valance could conceal this, but again it’s an added cost and might look too fussy in a minimalist setting.
The reverse roll is also good for clearing an obstruction, like a window crank or door handle, as seen here, because it pushes the fabric away from the glass.
If light is an issue with the reverse roll, you can add curtains on the sides.
Side channels, shown here, are another option. A side channel is an aluminum felt-lined channel on the sides and bottom of a window opening that the shade fits into. Think of it like a track for the edges of the shade. These create a seamless seal of shade on window, blocking all light out. It’s good for a bedroom or to create a movie theater effect in a media room.
More: Roller Shades Raise the Curtain on Style
Tell us: Which way do you roll?
Related Articles Recommended
Related Images Recommend
